Support
General Information - Engine stalls, looses / lost power, or is hard to start (4 stroke)
The cause for an engine to stall can range from simple operation error to engine failure. Review the different scenarios below to identify the possible cause of engine stalling. Fuel: Check to make...
Date Updated: 30/04/2012
Warranty - Do I have to take my equipment mower back to the dealer that I purchased it from for warranty?
You may take your mower to any manufacturer Authorised service center of the brand you have for evaluation, repair and warranty consideration. Make sure to take a copy of your dated sales receipt.
Date Updated: 30/04/2012
Product support - What is the difference between a 128LD and a 128LDX?
The difference between the Husqvarna 128LD and the 128LDX trimmers is the size of the shaft and the attachments that the units can accept. These attachments can not be interchanged between the 128LDX...
Date Updated: 30/04/2012
Changing Trimmer Line on T25, T35 and T45 trimmer heads
Husqvarna's T25, T35, T45 "Tap Advance" Trimmer Heads for straight shaft trimmers and T25C for curve shaft trimmers are exclusively designed by Husqvarna, these professional tap advance trimmer heads...
Date Updated: 30/04/2012
General information - Can I convert my mower in to a mulching mower?
Nearly all of our mowers can be made mulch capable with the installation of kit usually consisting of blades, baffles and a discharge cover. Mulch kits are available from any of the Authorised sales...
Date Updated: 30/04/2012
Maintenance - How do I purge the transmission on my hydrostatic lawn tractor?
Please review your operators manual for detailed information on purging your transmission. To ensure proper operation and performance, it is recommend that the transmission be purged before operating...
Date Updated: 30/04/2012
Warranty-How to find model and serial number.
To properly determine correct literature and service parts, you will need the Husqvarna model and serial number. I am going to provide you with the serial number location for the following product...
Date Updated: 30/04/2012
Product support - When I go to throttle the equipment it stalls, what's wrong?
Typically this sounds like the Carburettoris in need of a small or slight adjustment or possibly a rebuild. You should have you locally Authorised service center inspect and evaluate the operating...
Date Updated: 30/04/2012
General information - My warranty was denied and I had to pay for my repair. Why?
Our warranty clearly states that if a part is manufactured incorrectly or if it is assembled incorrectly, that we will cover the cost of repairing. Maintenance and wear items, such as filters, tires...
Date Updated: 30/04/2012
General Information - How to choose the correct saw chain?
This is not a straight forward process and it is recommended that you take your saw to the local Authorised sales and service center so the correct chain can be established. They will need to...